High-grade lime paint No. 344
Lime paints, in particular if they are tinted, should preferably be applied with a wide paint brush in crossing movements. When rolling, apply the last layer in one direction only. The reworking of already dried surfaces or the spot repair of small areas will lead to brindle surface appearance.
For exterior coatings, use only white, untinted paint.
(Information for colour tone mixing: net weight per 5 l = 6,9 kg | 10 l = 13,8 kg).
The paint can be diluted with up to 20% water. Stir well and apply 1 to 3 coats with a roller or brush. Allow for 24 hours of drying time between coats.
When still wet, the High-grade lime paint appears transparent but gets covering white when dry. It can also be tinted with the Lime tinting base no. 350. The colour tone book shows 80 vibrant colour tones.
Technical data sheet
water, calcium hydroxide, titanium dioxide, mineral fillers, cellulose
Trading units |
|Coverage per sq.m|
|5,0||up to 50|
|10,0||up to 100|