The marble look
Looks and feels like marble - this wall design technique brings a new noble look into your interiors.
1. application: A mixture of
2. application: A mixture of
Apply the mixture of Decorative clay plaster and the Full-shade tinting color very profoundly with a roll or a smoothing trowel. Apply approx. 1-2 m² first (consumption approx. 750-1000 ml per m²).
Afterwards, smooth out the surface with a spatula or a plastic trowel. Do not only smoothen in one direction, but criss-cross the movements, leaving the tracks of the trowel's edges and some bulges visible.
The egdes and bulges, very vivid when wet, will "fall" after drying (24-48 hours) and become less visible.
Slightly smooth the edges using sanding paper (150 grit), but do not smooth them out completely.
Produce a mixture of the Full-shade tinting color and the Wallpaper paste; roll it on or spread it on with a trowel thinly (consumption approx. 100ml per m²). At first, apply only approx. 1 m².
Collect the applied paint swiftly with criss-crossing movements using a trowel. The background needs to show through again.
The elevated spots (egdes, bulges) will apear darker now. In the deeper areas, the lighter mixture of the 2nd application is visible. This contributes to the typical marble texture.
The look can be achieved in many color variations:
Ask your professional AURO partner for a box containing 20 samples of original coatings in the current wall design styles.
The box contains 10 color variations of the marble look.